IMPORTANT PROPERTY REPORTING INFORMATION

(Please see links below on important information for infrared cameras and their purpose built functions).

INFRARED THERMAL IMAGING CAMERAS.

B-SERIES = BUILDING CARMERAS.
The B-SERIES cameras are purpose built and designed for the building industry the B-250 AND B335 cameras feature dew point indicators, humidity and insulation alarms and other important features that are essential when performing inspections on building applications and are distinctive in colour YELLOW black and silver.

Please note LEAK DETECTIVE uses B250 AND B335 thermal imaging cameras for all building diagnostic work.

T – SERIES = ELECTRIC AND MANCHANICAL CAMERAS
The T-SERIES cameras are purpose built and designed for electrical and mechanical industries and are distinctive in colour by their RED black and silver colours and should specifically be used for electrical and mechanical inspection work. Unfortunately most Property, Leak and Moisture reporting companies are incorrectly using a range of these T-SERIES cameras (predominantly T-200 ,T-250, T-360 model cameras) to perform Property, Leak and Moisture inspections.

If you are comparing companies equipment and qualifications it would definitely pay to find out what the make and model of the camera that is being used first and if the operator of the correct? camera is AINDT (Australian Institute of Non-Destructive Testing / Melbourne University) trained to operate the camera.

LEAK DECTECTIVES

Leak Detectives Senior management have been personally trained to operate Flir infrared cameras by Rodger Christiansz, Managing director of Flir Systems Australia (Details below) as an integral part of the AINDT standards and requirements at Melbourne University.

Roger Christiansz
Managing Director

FLIR Systems Australia Pty Ltd
10 Business Park Drive, Notting Hill VIC 3168, Australia

Critical Links

PLEASE SEE BELOW IMPORTANT MUST READ LINKS AND INFORMATION ABOUT FLIR INFRARED CAMERAS.

B-SERIES BOUCHER.
http://www.flir.com/B-Series


T-SERIES AND B-SERIES SPECS.
http://www.flir.com/thermography/apac/au/content/?id=14036


T-SERIES ELECRICIAL AND MECHANICAL.
http://www.flir.com/thermography/APAC/au/content/?id=14034


INFRARED CAMERA LITERATURE.
http://www.flir.com/thermography/APAC/au/content/?id=13934

FURTHER IMPORTANT PROPERTY REPORTING INFORMATION.

MOISTURE METERS.

Non-invasive moisture readings should be performed in digits when measuring multiple combined materials and not percentages unless performing invasive testing and or only if able to physically make contact with the timber framing that is being tested with the device which it calibrated with. If you are performing non-invasive pre-purchase inspections It would pay to find out if the inspector is measuring their moisture in digits, as materials such as Wall paper, Paint, Gibb board, Building paper and other wall lining finishers may prevent the inspector being able to make direct contact with the timber framing.

OTHER POINTS OF DIFFERENCE LEAK DETECTIVE CAN OFFER.

LEAK AND BUILDING REPORTS COMBINED

Please note LEAK DETECTIVE can provide both (inside and outside) thermal imaging inspections and (inside and outside) Building survey reports which is important that the right hand knows exactly what the left hand is doing to insure that nothing is otherwise missed in the event of using two independent companies to perform the reports individually.

TREATED TIMBER TESTING SERVICE.

LEAK DETECTIVE can also provide a treated timer testing service.

FREE ESTIMATES FOR REPAIRS POST REPORTING.

LEAK DETECTIVE can offer free estimates (By their companies contracted award winning master builders) for any defects found post reporting.

Thank you for choosing Leak Detective